Love to have a pitcher of freshly brewed iced tea on hand, but low on fridge space? Our air-tight pitchers might just be exactly what you're looking for. Made from BPA-free Tritan plastic, these pitchers offer an air-tight, leak-free lid and a rectangular shape that allow it easily fit a refrigerator door or to be stored on its side without the worry of leaking.
To use simply remove the plastic lid, fill the infuser basket with desired loose teas, and cold brew overnight. Cold brewing is recommended with this unit. If using hot water, do not put lid on or in refrigerator until water cools to room temperature. Pitcher is heat resistant up to 200°F. Do not over tighten.
Made in China | 68 oz | 11.25" tall | 5" x 3.75" at base | BPA-free Tritan plastic
We recommend using one of our perfectly portioned iced tea pouches with this pitcher. One pouch is suitable for the 40oz pitcher and there's no measuring involved!
Ask a question about airtight pitcher - barn and have the Adagio Teas community offer feedback.
Can the diffuser be removed from the top?
Asked by Gladys Heaton
on August 12th, 2021
“ Hello Gladys! Yes, they are separate, so you can brew without the infuser if you choose. ”
Answered by Adagio Teas
on August 13th, 2021
Can a replacement lid be purchased?
Asked by Janet Lynch
on December 10th, 2021
“ Hello Janet! If spare parts are available, they will appear on the same page as the product they fit. Unfortunately, at this time, we do not currently have replacement parts for this product. ”
Answered by Adagio Teas
on December 10th, 2021
Is this dishwasher safe?
Asked by Christine J
on July 30th, 2022
“ Hello Christine! We recommend hand washing this :) ”
Answered by Adagio Teas
on August 1st, 2022
Is the shape of the airtight pitcher - barn oblong top to bottom? I already have an old all around top to bottom oblong shaped pitcher from another company but like Adagio's look much better.
Asked by Courtney Sime
on November 5th, 2021
“ Hello Courtney! This pitcher is wider at the bottom and narrower at the top. ”
Answered by Adagio Teas
on November 8th, 2021
Are there plans to make replacement parts for this product? The o-ring/gasket on the lid is coming apart which would make this no longer airtight or leak proof. I would much rather replace the gasket or even the lid that purchase an entirely new pitcher.
Asked by Diana Trammell
on January 16th, 2023
“ Hello Diana! We don't have spare parts available, but please reach out to our info@adagio.com Customer Support team. ”
Answered by Adagio Teas
on January 19th, 2023
How do I remove the infuser?
Asked by Kristen Olsen
on August 6th, 2022
“ Hello Kristen! To remove the infuser from the handle please unscrew it, then you may re-screw it back into place when you're ready to make tea again. ”
Answered by Adagio Teas
on August 8th, 2022
how much water to 7 tbls leaves
Asked by Donna Lupo
on April 11th, 2023
“ Hello Donna! We would recommend filling the pitcher with 7 tablespoons of tea :) ”
Answered by Adagio Teas
on April 11th, 2023
I don't want to break anything. I just need to know how to remove the infuser basket to clean? If so do we just force it out by lifting it straight up, or twist it?
Asked by Bobby Henson
on July 14th, 2023
“ Hello Bobby! Twist 90 degrees and the unit will fall down from the handle. ”
Answered by Adagio Teas
on July 17th, 2023
Do you remove the infuser after the tea is brewed, or do you leave it in all the time?
Asked by Maria Guaglianone
on September 29th, 2025
“ Hello Maria! We recommend that you leave the infuser in until the tea reaches your desired strength. ”
Answered by Adagio Teas
on September 30th, 2025
1533
tons
Adagio ChatBot
Steeped in helpfulness - I'm your Adagio chat assistant. I'll do my best, but even I can over-steep an answer now and then!